Corrosion


Related content

SEDA December workshop to look at chemicals for RO

The Southeast Desalting Association (SEDA) has announced a technology transfer workshop on Chemical Treatment for Reverse Osmosis (RO) to be held in Palm Bay, Florida, in December 2013.

SWRO corrosion pre-conference workshop for CaribDA

A workshop on Understanding and Preventing Corrosion in Caribbean SWRO Plants will take place in Aruba, Netherlands Antilles, on 19 May 2012, prior to the 2012 Conference of the Caribbean Desalination Association (CaribDA).

Three hundred Fybroc seawater pumps ordered for giant aquarium

The Global Pump Solutions business unit of Met-Pro Corporation has received an order to supply more than 300 corrosion-resistant glass-fiber centrifugal pumps for a marine life park at a world-class casino resort complex in the heart of Southeast Asia.

The Gold Coast  seawater desalination plant in Queensland, Australia

Shutdown to follow full production at Gold Coast desalination plant

The Gold Coast seawater desalination plant in Australia began delivering water to the South East Queensland Water Grid at 100% capacity on 9 March 2009.

Corrosion and vibration slow Gold Coast commissioning

The progress of the Gold Coast seawater reverse-osmosis (RO) desalination plant in Queensland, Australia, towards its commissioning targets has been slowed by several problems, which are now being addressed.

Treatment chemicals annual demand rise to top 3%

Demand for water treatment chemicals in the US will rise 3.2% a year to US$ 7.3 billion by 2019, according to a report by market researcher, ReportLinker.

Energy Recovery hires senior management duo

Pressure energy technology firm Energy Recovery has appointed Chris M Gannon as chief financial officer and Eric O Siebert as vice president of corporate strategy. Both appointments are effective from 8 June 2015.

Membrana filtration curbs corrosion in Disney Shanghai cooling

Membrane manufacturer Polypore has supplied its Membrana ultrafiltration units for Shanghai Disneyland to curb corrosion in the resort's cooling water system.

Cutting the costs of corrosion in seawater desalination with shut-off butterfly valves

Lower cost materials and coatings used in addition to corrosion-resistant valve designs both urged on by preferences in plant construction contracts have reduced the capital and operational costs of valves used in membrane and thermal seawater desalination. The design of the valve too has a significant role to play in keeping a rein not only on corrosion but also cost of operation. This article first appeared in the issue of Desalination & Water Reuse magazine.

Membrane market growth to run until 2020

The fruits of growing research and development in forward osmosis for desalination are highlighted in a recent sector report as drivers of growth in the market for membrane separation technologies running to at least 2020.

H2O Innovation updates Piedmont Pacific acquisition

Its recent acquisition of Piedmont Pacific means that Canada's H2O Innovation Inc is now supplying flexible pipe couplings to some of the largest desalination plants under construction in the world.

The screens on the wedgewire water intake system that Poseidon is proposing for its seawater RO desalination plant at Huntington Beach, California, will be 1mm wide in order to meet new regulations

Huntington Beach is 'precedent-setting' for California

When the California State Water Board adopted new regulations on seawater desalination plants in 2015, Poseidon, the developer of a proposed 50 million gallons a day (227,000 m3/d) capacity seawater RO plant in Huntington Beach, California, went back to the drawing board on its water intake technology.

Mega-ton project symposium set for Tokyo in November

A symposium is to be held in Japan in November 2013 centred on the Mega-Ton Water System, a national research program to develop sustainable water treatment technologies, including large-scale desalination, that have a low environmental load and are energy-saving and low in cost.

Two workshops ahead for SEDA in January

The Southeast Desalting Association (SEDA) is holding two technology transfer workshops in Florida at the end of January 2013.

Erich Dawson becomes VP sales for Americas and Europe

Promotions and appointments announced by BWA

Two appointments affecting the European and Americas regions were announced by BWA Water Additives of the US on 2 April 2012, as well as two new vice-president positions.

CaribDA opens registration for Aruba conference

The Caribbean Desalination Association (CaribDA) has opened registration for its 2012 Conference & Exposition 80 Years Of Desalination Makes For One Happy Island.

Voltea gets funding for two desalination applications

Dutch desalination innovator Voltea BV announced on 21 February 2012 that it had completed a € 4.5 million funding round to support the commercial rollout of its Capacitive Deionization (CapDI) technology.

The WRF wants to provide guidance on blending for direct potable reuse water projects

WRF unveils initial findings of study into blending variables in DPR

The US Water Research Foundation has shared preliminary findings from its ongoing research into the impact of blending variables on direct potable reuse water.

The Victorian Desalination Plant is located at the southerly most tip of Australia on the Bass Coast

AquaSure's Victorian Desalination Plant secures its first water order

* The first water order for 50 gigalitres received 1 April 2016* Plant's modular design allows for flexibility in production from zero to 150 gigalitres

The Tugun desalination plant.

Gold Coast desalination plant finally handed over

The Tugun desalination plant in Gold Coast, Australia, was handed over to the Queensland state government on 1 October 2010 and has become part of the South East Queensland Water Grid (SEQWG).

IDA publishes program for Gulf desalination and environment seminar

The International Desalination Association has published details of program sessions and topics for its seminar on Desalination and the Gulf: The Relationship between the Environment and Meeting the Region's Water Needs, which will take place in Bahrain on 6-7 December 2010.

The Gold Coast seawater reverse-osmosis desalination plant at Tugun.

Gold Coast desalination plant producing water again

The major phase of final works at the Tugun desalination plant on Queensland's Gold Coast in Australia has been completed, the minister for infrastructure and planning, Stirling Hinchliffe, announced on 10 September 2010.

RO included in Czech powerplant water treatment upgrade

Wabag Brno has begun modernisation of the water treatment plant at the Prunéřov power station in the Czech Republic, involving clarification, filtration, reverse osmosis, softening and demineralisation.

Flowserve valves for Perth 2 desalination plant

Flowserve Corporation announced on 3 June 2010 that it had received an order for plug valves for the Southern Seawater Desalination Plant in Western Australia. The order was booked in the fourth quarter of 2009.

Innovations in IDA Congress technical program

Round-table sessions and touch-screen availability of poster presentations will be used for the first time in the International Desalination Association's World Congress in Dubai on 7-12 November 2009, IDA announced on 19 October 2009.

The Gold Coast  seawater desalination plant in Queensland, Australia

Some Gold Coast desalination issues still unresolved

A large number of non-compliance issues relating to the Gold Coast seawater desalination plant in Queensland, Australia, have been listed in a letter sent on 2 July 2009 by Keith Davies, CEO of WaterSecure, who are taking over the project, to the Queensland Department of Infrastructure & Planning.

Calder bought by Flowserve

US pump and valve manufacturer Flowserve announced on 21 April 2009 that it acquired Swiss desalination energy-recovery system provider Calder AG. Terms of the transaction were not disclosed.

Italmach acquires Compass, adds manufacturing base in North America

Italmach Chemicals has acquired Compass Chemical International, adding a strategically important site in Texas that it hopes will support its growth in the oil and gas industry.

Gold Coast desalination plant starts at 33% capacity

The Gold Coast desalination plant in Queensland, Australia, began operating on 26 February 2009 at 33% capacity, producing more than 40,000 m³/d.

IDA 2015 World Congress draws 1,700 delegates

More than 1,700 delegates from 63 countries attended the International Desalination Association's (IDA's) 2015 World Congress held in San Diego recently according to the association's key metrics published this week. Awards for papers and presentations topped US$ 30,000.

Weir Materials acquired by Rolled Alloys

The Weir name finally dropped out of the desalination mainstream in mid-October when Weir Materials was acquired by Rolled Alloys (RA) a US-based supplier of heat-resistant and corrosion-resistant alloys and branded stainless steels.

Low-pressure valves for desalination: time for a new look at the butterfly?

Across the entire water industry spectrum, valves are an essential element in the treatment of water and in its supply. The subject of butterfly valve technology and its suitability for desalination plants is one particular aspect that rightly demands attention, particularly in respect of specifying materials that will withstand corrosion. The centred-disc butterfly valve is a proven technology and, according to KSB's Amri Water Valve Division Competence Centre in La Roche Chalais, France, it is in widespread demand from all types of desalination plant. It is a simple yet effective design principle whereby the disc rotates around an axis at right angles to the flow. When open, the fluid passes around both sides of the disc. "Low pressure valves are rarely considered as a critical item," says Pascal Viaud, "but if not correctly specified at the outset of a project problems can occur over the long term. Wrong selection of valves can be the cause of up to 40% all operational problems, so the customer must consider the real importance of valves at the specification stage. Even though valves may only constitute 1% of the plant investment costs, it only takes a single valve to create problems and seriously affect plant production." Butterfly valves are installed in the low-pressure areas of a desalination plant, usually in the early stages of production upstream of the membranes and then again at the end on the permeate lines. By keeping the butterfly valves open each valve creates a pressure loss and with the centred disc the differential pressure is much lower than an offset disc valves. Where a high number of valves, say 1,000 units, are installed in a desalination plant the accumulation of pressure saved on each valve will contribute to lower energy savings. The full article first appeared in the November/December 2008 issue of D&WR magazine


Suggested keywords