MEMBRAY® Toray MBR Membrane
Toray's Membrane Bioreactor (MBR) process is a combination of biological wastewater treatment and membrane filtration.
Biodegradable pollution is reduced using bacteria and microorganisms. Following biological treatment, the activated-sludge is separated from the treated water by a microfiltration membrane.
MBR Technology explained
Toray’s MEMBRAY® MBR Membranes are PVDF flat sheet membranes with a PET non-woven support layer. The nominal pore size is 0.08 microns with a narrow pore size distribution. Toray membrane elements with a 1.4 m2 or a 0.9 m2 membrane area are joined to our membrane module. These modules are composed of 50 to 200 membrane elements.
MEMBRAY® modules consist of a membrane element, a stainless steel element frame and an aeration block.
Oliver Mercer North Dunn – FRO Pretreatment Plant
After a competitive bid Wigen Water was awarded the project with Toray UF Modules
Instruments & controls
MEMBRANE SPARE PARTS
Toray recommends you to replace spare parts such as rubber fixing gaskets periodically in order to provide you excellent permeate water at all time. Below shown are the most common spare parts available from Toray. Please contact us for the details of the specifications and a number of the spare parts required for each MBR module.
Filtration & membranes
TORAYFIL® Toray UF Membrane
Toray's PVDF hollow fiber membrane module effectively removes suspended solids and microorganisms such as pathogens