AWC A-106 Reverse Osmosis Biofilm Inhibitor

AWC A-106 is premium antifoulant designed to disperse organic and inorganic foulants


AWC A-106 Reverse Osmosis Biofilm Inhibitor

AWC A-106 inhibits biofilm formation by preventing bacteria from anchoring onto the membrane surface

AWC A-106 will disperse colloidal particulates such as silt, clay and colloidal silica.

AWC A-106 inhibits formation of sulfate, carbonate and phosphate scales. It also exhibits control of Silica at low to moderate levels.

AWC A-106 effectively stabilizes metal ions and disperses metal oxides

AWC A-106 is environmentally compatible, especially where discharge of waste into the environment is a concern.

AWC A-106 does NOT contain any biocides or toxic chemicals.

Typical Properties
Appearance…………..……………………Clear colorless to yellow liquid
Odor…………………………………………………….Characteristic Odor
Solubility in water
…………………….…………………………..Complete
pH (as is) @ 25oC……………………………………………………….3 – 5
Specific Gravity
……………….…………………………………………1.00 ± 0.05

Typical Properties
Appearance…………..……………………Clear colorless to yellow liquid
Odor…………………………………………………….Characteristic Odor
Solubility in water
…………………….…………………………..Complete
pH (as is) @ 25oC……………………………………………………….3 – 5
Specific Gravity
……………….…………………………………………1.00 ± 0.05

Chemical Feeding and Control
AWC A-106 is normally fed continuously prior to the final cartridge filter. It should be injected by chemical dosing pump from a dilution tank or directly from the drum to the feedwater line. The amount of AWC A-106 required to inhibit biofouling and scale formation depends on the quality of feedwater and size of the membrane system. The specific control ranges will be specified by the AWC technical representative who can also assist you in determining the appropriate dose rate for your system.

Packaging
AWC A-106is packaged in 55 gallon, non-returnable plastic drums.

AWC A-106 Reverse Osmosis Biofilm Inhibitor does not have any posts.

Get the newsletter