Spigot & Socket Tyton Joint
Frazer & Tabberer can supply various jointing methods specific to all requirements. Internal linings for potable water are in accordance with DWI 25 (1) (a) and 31 (4) (a). Internal linings for wastewater are in accordance with DIN 2614.
Spigot & Socket Tyton Joint
Diameters: 80mm – 300mm
Steel Grades: ST37, ST52, API, ASTM A106, X42, X52, X60
Linings: Cement Mortar Lining to DWI 25 (1) (a)
Protection: Blue 3 Layer PE; 3 Layer PP (both 1.8-2.2mm thick); FBE (500µm thick). Sewage pipes would be black in colour.
Uses: Potable Water & Sewage Sludge (with Acronal cement mortar).
Internal Repair: No internal repair needed.
Pressure Rating: 40 bar, with standard thrust blocks at the bends.
Realistic Usability: Any potable water or sewage sludge pipeline, especially where aggressive or rocky ground conditions will result in, or has resulted in, corroded, cracked and leaking pipelines.
Joint Type: Tyton Push Fit joint.
Fittings: Tyton D I fittings.
Aim: No corrosion, no leaks, no minimum longevity of life.
Soil Types: Ideal for all soil types because of complete corrosion protection.
Extras: Cement mortar rock shield for river crossings & rocky ground.

Desalination
Canusa Heat Shrink Products
Frazer and Tabberer supply Canusa heat shrink materials which are used world wide and generally acknowledged as being the best and most cost effective pipe joint corrosion protection available. The UK market is currently a growth area for Canusa with an ever increasing number of companies moving away from cold applied tapes to heat shrink sleeves.

Desalination
Steel Pipes
Frazer & Tabberer Ltd is a specialist supplier of coated and lined steel pipelines.

Desalination
Steel Water Mains Pipe
Swaythling Pipe Bursting Scheme near Southampton.

Desalination
F&T’s E Joint
One of a number of jointing systems offered by Frazer & Tabberer.

Desalination
Stop Tap Box Locking Replacement Lids
Locking Replacement Stop Tap Box Lids are currently used by around 20 UK water companies. They are a simple

Desalination
Frazer & Tabberer Feature in Sunday Times Fast Track 100 List 2007
Featured at number 23 in the 2007 Sunday Times league of Britain’s fastest growing private companies

Desalination
Frazer & Tabberer receives ISA & OHSAS accreditations simultaneously
Frazer & Tabberer Ltd is proud to be among very few

Desalination
3 Layer Polyethylene
Buried pipelines are often exposed to extremely high stresses under service conditions. Efficient corrosion protection therefore

Desalination
Large Diameter Pipelines
Frazer and Tabberer supplied approximately 18km of 1220mm diameter pipe to the D2H Project in Northern Ireland in 2006.
Desalination
Contaminated Ground
With the current trend of redeveloping brownfield sites for housing

Desalination
Frazer & Tabberer Flanged Joint
Frazer & Tabberer can supply various jointing methods specific to all requirements. Internal linings for potable water are in accordance with DWI 25 (1) (a) and 31 (4) (a). Internal linings for wastewater are in accordance with DIN 2614.

Desalination
Frazer & Tabberer Victaulic Joint
Frazer & Tabberer can supply various jointing methods specific to all requirements. Internal linings for potable water are in accordance with DWI 25 (1) (a) and 31 (4) (a). Internal linings for wastewater are in accordance with DIN 2614.

Desalination
Frazer & Tabberer’s Socket Weld Joint
Frazer & Tabberer can supply various jointing methods specific to all requirements. Internal linings for potable water are in accordance with DWI 25 (1) (a) and 31 (4) (a). Internal linings for wastewater are in accordance with DIN 2614.

Desalination
Frazer & Tabberer’s butt weld joint
Frazer & Tabberer can supply various jointing methods specific to all requirements. Internal linings for potable water are in accordance with DWI 25 (1) (a) and 31 (4) (a). Internal linings for wastewater are in accordance with DIN 2614.

Desalination
Spigot & Socket DKM Joint
Frazer & Tabberer can supply various jointing methods specific to all requirements. Internal linings for potable water are in accordance with DWI 25 (1) (a) and 31 (4) (a). Internal linings for wastewater are in accordance with DIN 2614.

Desalination
Spigot & Socket Tyton Anchor Joint
Frazer & Tabberer can supply various jointing methods specific to all requirements. Internal linings for potable water are in accordance with DWI 25 (1) (a) and 31 (4) (a). Internal linings for wastewater are in accordance with DIN 2614.
Desalination
Steel Specifications for Frazer & Tabberer Pipe
The steel specification for all sizes of pipe (80mm - 2000mm) is as follows: SAW spirally or longitudinally welded pipe. Steel grade ST37

Desalination
Pipe Accessories
Whatever accessories you require for your pipeline