Spigot & Socket Tyton Anchor Joint

Frazer & Tabberer can supply various jointing methods specific to all requirements. Internal linings for potable water are in accordance with DWI 25 (1) (a) and 31 (4) (a). Internal linings for wastewater are in accordance with DIN 2614.


Spigot & Socket Tyton Anchor Joint

Spigot & Socket Tyton Anchor Joint

Diameters: 80mm – 300mm

Steel Grades: ST37, ST52, API, ASTM A106, X42, X52, X60

Linings: Cement Mortar Lining to DWI 25 (1) (a)

Protection: Blue 3 Layer PE; 3 Layer PP (both 1.8-2.2mm thick); FBE (500µm thick). Sewage pipes would be black in colour.

Uses: Potable Water & Sewage Sludge (with Acronal cement mortar).

Internal Repair: No internal repair needed.

Pressure Rating: 16 bar up to 200mm, 10 bar for 250mm & 300mm. No thrust blocks req.

Realistic Usability: Any potable water or sewage sludge pipeline, especially where aggressive or rocky ground conditions will result in, or has resulted in, corroded, cracked and leaking pipelines after only a few years.

Joint Type: Tyton Anchor Push Fit joint.

Fittings: Tyton D I fittings.

Aim: No corrosion, no leaks, no minimum longevity of life.

Soil Types:  Ideal for all soil types because of complete corrosion protection.

Extras: Cement mortar rock shield for river crossings & rocky ground.

Get the newsletter