What if an ultrafiltration membrane provided…

3 to 10 times higher flux than other membranes, reducing the foot print of the membrane system? 50% reduction in waste water through higher recovery 2 to 10 times longer lifespan than other membranes significantly reducing the operating costs Made of an inert material more resistant to solids and organic fouling and can be cleaned more easily Allowed you to clean more aggressively, if needed, with higher chemical and temperature resistance And made not with hollow fibers, but a solid structure so you never had to repair a fiber again...


What if an ultrafiltration membrane provided…
Contact

What if a membrane had all of these advantages with a better total cost of ownership compared to polymeric hollow fiber systems?

The wait is over, the CM-151™ from Nanostone:


Water enters the CM-151™ module through the bottom of the vessel and enters the feed channels.  A manufacturing breakthrough is the patented ceramic flat sheet segment design.  Each ceramic segment is manufactured on an individual basis which dramatically increases the manufacturing efficiency in both extrusion and the ceramic sintering process.  The individual segments are then bound together in a monolith structure with a proprietary potting material developed to provide the necessary strength as well as temperature and chemical resistance to match the operating life of the ceramic membrane itself.

 


N.B. The information contained in this entry is provided by the above supplier, and does not necessarily reflect the views and opinions of the publisher